• 

• 3G Digital 9dBm ICS Home Booster Specification

  Model No. ICS-2100P

Specifications

Parameters			Specifications
1	Frequency Range	Up Link (RX)	1960 ~ 1975 MHz
		Down Link (TX)	2150 ~ 2165 MHz
2	Channel Spacing		5 MHz
3	Channel Raster		200 KHz
4	Operating Band：Number of Channels		3 FA (15MHz)
5	System Gain		70 dB
6	Gain Flatness		≦ ± 1.5 dB
			(Peak to Peak ≦ -0dB ~ +3dB)
7	Cancellation (Gain =ISO+15dB)		+25dB(-10dB)
8	Automatic Gain Control Range (AGC)		≧ 25 dB
9	Donor & Service Antenna Gain		6dBi(Typical) for Each
10	Maximum Output Power	Up Link (RX)	+ 13 dBm ± 1 dBm / One Carrier (RMS)
			+ 10 dBm ± 1 dBm / Two Carriers (RMS)
		Down Link (TX)	+ 10 dBm ± 1 dBm / Two Carriers (RMS)
			+ 7dBm ± 1 dBm / Two Carriers (RMS)
11	Automatic Shut Down Power Level (Always Auto Recovery)	Up Link (RX)	O/P ≧ + 15 dBm / One Carrier (RMS)
		Down Link (TX)	O/P ≧ + 12 dBm / One Carrier (RMS)
12	Maximum Input Power (Without Damage)		+0 dBm (with AGC ON and Full Attenuation)
13	Group Delay		＜ 6 us
14	Noise Figure(Uplink)		＜ 6 dB @Max Gain
15	VSWR		≦ 1.5:1
16	Tx/Rx Isolation		＞90dBc
17	Input Sensitivity		≦-95dBm
18	Out of Band Gain	2.7≦f_offset＜3.5 MHz	＜ 60 dB
		3.5≦f_offset＜7.5 MHz	＜ 45 dB
		7.5≦f_offset＜12.5 MHz	＜ 45 dB
		12.5 MHz≦f_offset	＜ 35 dB
19	Spectrum Emission Mask	2.515MHz≦f_offset＜2.715MHz	＜ - 22 dBm / RBW 30 KHz
		2.715MHz≦f_offset＜4.0MHz	＜ - 34 dBm / RBW 30 KHz
		4.0MHz≦f_offset＜8.0MHz	＜ - 21 dBm / RBW 1 MHz
		8.0MHz≦f_offset＜f_offset(max)	＜ - 25 dBm / RBW 1 MHz
20	Spurious Emission (Category B)	9 KHz ~ 150 KHz	＜ - 36 dBm / RBW 1 KHz
		150 KHz ~ 30 MHz	＜ - 36 dBm / RBW 10 KHz
		30 MHz ~ 1 GHz	＜ - 36 dBm / RBW 100 KHz
		1 GHz ~ 12.75 GHz	＜ - 30 dBm / RBW 1 MHz
	Spurious Emission (Category B)	Co-existence and Co-location	Comply With 3GPP TS 25.106
21	Error Vector Magnitude (EVM)		＜ 10 % (Support HSPA)
22	Peak Code Domain Error (PCDE)		＜ - 35 dB (at SF=256)
23	Adjacent Channel Rejection Ratio (ACRR)	± 5 MHz	＞ 25 dBc
		± 5 MHz & ±10 MHz	＞ 25 dBc
24	Input Intermodulation		Increase ＜ 10 dB
25	Input Intermodulation	Co-existence and Co-location	Comply With 3GPP TS 25.106
26	Output Intermodulation (Downlink only)		Comply With 3GPP TS 25.106
27	Impedance		50Ω
28	Embedded Service & Donor Ant		7dBi
29	External Donor Antenna		5dBi, SMA Female Connector, VSWR≦1.5:1, Water Proof, Jelly plate for glass sticking, including wall-mount kit.
30	Antenna Mode switchable		User can define to use embedded antenna or external antenna.
31	Stand-By Mode		UL HPA auto-detection function. UL HPA ON when user is calling and HPA Off when no user calls.
32	Power Supply		I/P : AC 110V / 220V ± 10 % , 47 ~ 63 Hz (US Plug Type) ;(white color)
33	Power Consumption		≦21 W
34	Operating Temperature		0 ℃ ~ + 40 ℃
35	Humidity		≦ 95 ％
36	Cooling		Heat sink Convection Cooling
37	Dimension (H * W * D)		226 x 174 x 66 mm
38	Weight		≦ 2Kg
39	Mean Time Between Failure (MTBF)		≧ 50,000 Hours
40	RF Connector		SMA Female (L type connector)
41	Accessories		10M RG cable(white color)(Connector type is SMA Male)
42	EMC		Comply With 3GPP TS 25.113
43	Safety		Comply With EN 60 950,ETL
LED Indicators		On (Blue) / Off (dark)	PSU
		Normal (dark) or Alarm (red color)	UL and DL HPA Failure (1pcs LED)
			UL and DL Isolation Alarm (1pcs LED)
		Input/ Isolation Level Display (by step display in Blue LED)