Parameters |
Uplink |
Downlink |
Frequency Range |
723 ~ 748MHz |
783 ~ 803MHz |
Channel Bandwith |
20 MHz |
Cancellation Performance |
≥ 35dB (Gain = ISO + 15dB ~ Gain=ISO - 20dB) |
Gain |
85dB ( in-band ≥ 85dB ) |
90dB ( in-band ≥ 90dB ) |
Gain Flatness |
≤ ±1.5dB |
Manual Gain Control (Step Attenuation) |
≥ 30dB @ 1dB/ Step |
Auto Gain Control |
≥ 30dB |
Max Input Power ( Without Damage) |
0dBm (with AGC ON and Full Attenuation) |
Output Power |
≥ 27dBm @ One Carrier |
≥ 40dBm @ One Carrier |
Auto Shutdown Power Level |
≥ 29dBm @ One Carrier |
≥ 42dBm @ One Carrier |
Frequency Stability |
≤ ± 0.01ppm |
Out of Band Gain |
Comply With 3GPP 36.106 Chapter 8 |
Operating band Unwanted spurious |
Comply With 3GPP 36.106 Chapter 9.1 Category B (Option 2) |
Input inter-modulation |
Comply With 3GPP 36.106 Chapter 11 |
Output inter-modulation |
Comply With 3GPP 36.106 Chapter 12 |
Spurious Emission |
Comply With 3GPP 36.106 Chapter 9.2 Category B |
Tx/Rx Isolation |
|
Error Vector Magnitude(EVM) |
≤ 8% RMS when ICS Enable ( Gain=ISO+15dB) |
Adjacent Channel Rejection Ratio (ACRR) |
Comply With 3GPP 36.106 Chapter 13 |
Noise Figure |
≤ 6dB @ Max Gain |
Return Loss |
≥ -14dB |
Group Delay |
≤ 4.5usec |
RF Connector |
N-female |
Operating Temperature |
0℃ ~ 60℃ |
Humidity |
70% ~ 90% |
Environment Condition |
IP55 |
MTBF |
50000 hours |
Power Consumption |
≤ 500W |
Dimension (H * W * D) |
610mm x 400mm x 320mm ( include Braket ) |
Weight |
≦ 40Kg |
RCU & Antenna combined loss |
≦ 15dB (RCU should be work when donor antenna locate in -85dBm area) |
Remote Control Unit |
Via USB port at local site / Via 2G+3G Dual Band modem at remote site |
Backup battery |
by chargeable battery for wireless modem only |
Isolation Detection Function |
Auto Detection and Display from OMT(GUI) |
Alarm |
PA output power alarm, DC power failure, Door open alarm(if has door), Temperature alarm |
Impedance |
50Ω |
Power unit |
AC 110~220V, 20% 50~60Hz |
EMC |
Comply with 3GPP TS36.113 |
Safety |
Comply with IEC/EN 60950-1 |