| No |
Items |
Specification |
| 1 |
Frequency Range |
60 - 900MHz, specific band applicable |
| 2 |
Maximum Gain |
40dB |
| 3 |
Gain Flatness |
+/- 2dB |
| 4 |
Maximum output power (1dB Compression) |
+22dBm |
| 5 |
Multi-carrier output Power level (6 x 25KHz Carriers) |
+12dBm per carrier |
| 6 |
Maximum Input power with no permanent damage |
+5dBm |
| 7 |
Manually set Attenuator Range |
31dB/1dB Steps |
| 8 |
Noise Figure (max) |
2dB |
| 9 |
P1dB |
+22dBm |
| 10 |
OIP3 |
+40dBm |
| 11 |
Input Loss |
≥ 9.54dB ( VSWR 2:1 ) |
| 12 |
DC Input Voltage Range |
DC 11 ~ 28V |
| 13 |
Min to Max operational current range |
If different to item 24 please advise |
| 14 |
Reverse DC Polarisation protection |
Yes |
| 15 |
Input & Output RF Termination Connectors |
SMA-Female |
| 16 |
DC Power Connector |
2 pin 5mm Pheonix with screw lug on both side |
| 17 |
+ and -ve Polarity Orientation on DC Connector |
as per current models |
| 18 |
Alarm Relay Connector |
3 pin 5mm Pheonix with screw lug on both side |
| 19 |
Alarm Relay outputs |
Normally Closed/Common/Normally Open |
| 20 |
Dimensions (including heatsink) |
37mm (1.46”) x W 57mm (2.2”) x L 82mm(3.2”) |
| 21 |
Mounting |
Flat surface |
| 22 |
Mounting hole thread size (metric) |
M3 |
| 23 |
LNA Current Detector |
Low / High Current Alarm |
| 24 |
Factory Set low and high current detector alarm range |
150 ~ 430mA |
| 25 |
LED |
Power (green) / Alarm (Red) |
| 26 |
Operational Temperature Range |
-10 to +60 Deg C |
| 27 |
Screen pinted text orientation |
Heatsink at the top |
| 28 |
Metalic label information |
Part & Serial Number |
