| No |
Items |
Specification |
| 1 |
Frequency Range |
100 - 900MHz, specific band applicable |
| 2 |
Gain |
~ 37dB, Max or ~ 35dB, Max |
| 3 |
Gain Flatness over frequency bandwidth |
+/- 2dB |
| 4 |
Gain Variation over rated temperature range |
+/-1dB |
| 5 |
Maximum output power (1dB Compression) |
+43dBm |
| 6 |
Multi-carrier output Power level (6 x 25KHz Carriers) |
+33dBm per carrier |
| 7 |
Maximum Input power with no permanent damage |
+15dBm |
| 8 |
Noise Figure (max) |
7dB |
| 9 |
OIP3 (@ 40dBm x 2Tone , 1MHz Tone Spacing) |
> +45dBm |
| 10 |
Input Loss |
≥ 9.54dB ( VSWR 2:1 ) |
| 11 |
DC Input Voltage Range |
DC 21 ~ 28V |
| 12 |
Min to Max operational current range |
If different to item 23 please advise |
| 13 |
Reverse DC Polarisation protection |
Yes |
| 14 |
Input & Output RF Termination Connectors |
SMA-Female |
| 15 |
Input DC Power Connector |
2 pin 5mm Pheonix with screw lug on both side |
| 16 |
+ and -ve Polarity Orientation on DC connector |
as per current models |
| 17 |
Alarm Relay Connector |
3 pin 5mm Pheonix with screw lug on both side |
| 18 |
Alarm Relay outputs |
Normally Closed/Common/Normally Open |
| 19 |
Dimensions (including heatsink) |
85mm x 100mm x 140mm |
| 20 |
Mounting |
Flat surface |
| 21 |
Mounting hole thread size (metric) |
M3 |
| 22 |
HPA Current Detector |
Low / High Current Alarm |
| 23 |
Factory Set low and high current detector alarm range |
1A ~ 5A |
| 24 |
LED |
Power (green) / Alarm (Red) |
| 25 |
Screen pinted text orientation |
Heatsink at the top |
| 26 |
Metalic label information |
Part & Serial Number |
| 27 |
Operational Temperature Range |
-10 to +60 Deg C |
